2026 John Deere Golf & Sports Turf 7200A PrecisionCut 

• TechControl™ Display locks in performance, and uptime
• LoadMatch™ to maintain cut quality
• 35% larger traction drive, 17% larger wheel motor displacement
• Reach trimming system for bunkers

Features May Include: 

TechControl display maximizes performance and uptime by allowing more control in operation and diagnostics

Passcode-protected TechControl display enables quickly setting or changing mowing speed, turning speed, or transport speed to limit variations in performance by different operators.

Quickly adjust the mow or transport speed to make sure mow speed is what is needed for the changing conditions. The setting can be adjusted precisely using a speedometer app on a smartphone or global positioning system (GPS) device.

Use the TechControl to slow the machine during turns while mowing and protect against turf scuffing and aggressive turning operators.

The turn speed control engages when in mow and the cutting units are lifted for turns. Once the turn is made and the cutting units are lowered, the machine speed returns to the set mow speed.

The turn speed is a percentage of mow speed. When set to 100 percent, turn speed control is off or allows 100 percent of the mow speed in turns. Turn speed setting of 50 percent allows only 50 percent of the set mow speed to be reached during turns.

Here is an example:

Mow speed = 9.66 km/h (6 mph)
Turn speed set at 50 percent
Maximum turning speed will be 4.83 km/h (3 mph)

The A-model PrecisionCut™ Mowers, E-Cut™ Hybrid Mowers, and TerrainCut™ Mowers have the latest in advanced diagnostics through the TechControl display. Most all diagnostics are performed while sitting in the operator’s seat.

The TechControl has onboard visual diagnostics allowing quick and easy machine diagnostics, maximizing up time. The system allows technician to see inputs and outputs of the electrical system.  Also, the technician can see stored controller codes on the machine to aide in troubleshooting incidents that may have occurred while on the course.

The TechControl will also display the notification for maintenance of the hydraulic and engine oils using service timers to notify when it has reached the time to perform the required service.

eHydro™ hydrostatic pump and large-capacity wheel motors for serious hill-climbing capabilities

The eHydro™ traction pump and wheel motors in the new A-model take performance, traction, and operation to the next level.

The new system was designed to take on the most challenging course conditions. The traction drive pump flow increased 35 percent and the wheel motors increase 17 percent in displacement over prior models. These increases to the traction system make the A-models ideal for undulating terrain providing superior performance and traction out on the course.

The new traction system in the A-models is driven by a servo-controlled hydrostatic pump. The control of the pump is no longer mechanical linkages, but instead is electronic.

Approximately 110 parts have been eliminated from the traction drive system compared to prior models. The new design also eliminated two adjustments. Reducing the complexity of the drive system means no more linkages to adjust or repair, decreased routine maintenance, and providing reliable day-in/day-out operation

Width on demand—match the conditions with the touch of a button

Featuring both a 68-in. (172.72-cm) to 72-in. (182.89-cm) width of cut for 26-in. (66.04-cm)  Quick Adjust 7 (QA7) cutting units and an 80-in. (203.20 cm) to 84-in. (213.36 cm)  width of cut for 30-in. (76.20 cm)  QA7 cutting units that can be changed with the touch of a button, the 7200A PrecisionCut Trim and Surrounds Mower ensures that all grass in its path is cut in both flat and undulating conditions.

The narrower width of cut is recommended for undulating terrain and tight turns where more cutting overlap is required, to make sure that no uncut grass is left behind. This width expands the total cutting unit overlap to maximize cut quality by eliminating uncut strips of grass that may be caused by undulating terrain, or a layout that requires a lot of tight turns.

This exclusive feature provides a productivity boost compared to competitive equipment in the marketplace. The wider width of cut setting is recommended on flat terrain with long straight runs. This width of cut has maximum productivity with minimal overlap.

Where some machines in the marketplace have to completely replace lift arms to change width of cut, the 7200A PrecisionCut Trim and Surrounds Mower allows changes to be made from the seat by hydraulically shifting the front decks in our out, with no additional parts to purchase. All it takes is the touch of a button.

Changing width of cut with the width-on-demand system is simple, and can be done while the cutting units are on the ground. Simply toggle the width-on-demand switch on the operator command arm forward to spread the cutting units wider to the 72-in. (182.88 cm) or 84-in.(223.52 cm) width of cut, or toggle backward to bring the cutting units into the tighter 68-in. (172.72 cm) or 80-in. (203.20 cm) mowing width.
This maximizes productivity by offering a choice of the width that best suits the terrain. And the terrain may allow for both modes in different areas.

For example, narrower width may be used in mounding areas or areas around bunkers, but once the terrain flattens out and the extra overlap is not needed, it can be switched to the wider width.

How a golf course uses the system is up to the golf course. But rest assured, there are areas on the course where each width may come in handy to maximize productivity to get the job done faster, and with excellent cut quality.

Changing width of cut with the width-on-demand system is simple, and can be done while the cutting units are on the ground. Simply toggle the width-on-demand switch on the operator command arm forward to spread the cutting units wider to the 72-in. (1.8- m) or 84-in. (2.13-m) width of cut, or toggle backward to bring the cutting units into the tighter 68-in. (1.7-m) or 80-in. (2.03-m) mowing width. It's really that simple.

This maximizes productivity by offering a choice of the width that best suits the terrain. And the terrain may allow for both modes in different areas.

For example, narrower width may be used in mounding areas or areas around bunkers, but once the terrain flattens out and the extra overlap is not needed, it can be switched to the wider width.

How a golf course uses the system is up to the golf course. But rest assured, there are areas on the course where each width may come in handy to maximize productivity to get the job done faster, and with excellent cut quality.

Final Tier 4 (FT4) diesel engine offers plenty of power for mowing

Power starts with the engine, and the 7200A PrecisionCut™ Trim and Surrounds Mower has an abundance of power and performance with this FT4 solution. The 3-cylinder 24.7 hp (18.4-kW) at 3000 rpm diesel engine has a strong reputation for power and performance.

This engine provides plenty of power for climbing hills without sacrificing power to run the Quick-Adjust (QA7) 26-in. (66-cm) or 30-in. (76.2-cm) cutting units and attachments.

The air-intake system is also designed to pull clean air from the front of the machine behind the operator's seat, rather than dirty air from the rear of the machine. This improves engine performance and efficiency during those hot, dusty times of the year.