2026 Bush-Whacker RME 22

Rear-mount Boom Brush Cutter

22-Foot Rear-Mount Boom Mower. The cutting edge of versatility with all the quality, service, and dependability you’ve come to expect from a Bush-Whacker. Five-foot brush cutter with a 22-foot boom arm. With advanced joystick controls of four axis of motion. Independent, pressure compensated hydraulic system with load sensing capabilities. A 7″ gauge deck with 3/8″ side skirts. High-strength steel tubing on primary and dipper booms.

Features May Include:

• Hitch Type

CAT II (CAT II Quick Hitch adaptable) or CAT III 3-point hitch

• Transportation Width

101″

• Transportation Length

96″

• Transportation Height

140″

• Oil Reservoir Capacity 

50 gal.

• Horizontal Reach

22′

• Vertical Reach

21′

• Down Reach

14′

• Front to Back Pitch 

108°

• Operating Pressure

2,700 PSI

• Pitch of Mower Head

120°

• Deck Thickness

7 gauge”

• Skid Shoe Thickness

3/8″

• Weight (Approximate)

3,250 lb. W/O oil

• Tractor HP Requirements

90 HP PTO, 11,500 lb minimum tractor weight.

• Tractor PTO

540/1,000 RPM

• Cutter Shaft Speed

980 RPM

• Hoses

2″ ID suction line, 1″ ID pressure line

• Control Valve

Proportional 5 bank valve with load sensing capability and manual override built-in.

• Control

Proportional computer-controlled joystick which controls 4 axis of motion. Toggle switch used for mower head with emergency stop override.

• Power

94 HP at a speed of 2,025 RPM

• Hydraulic Filters

140 Micron suction filter located inside the tank; 10-micron spin-on type return filter with restriction gauge

• Hydraulic System

Totally independent

• Hydraulic Pump

Pressure compensated piston-type used to reduce the heat of the system produces a flow rate of 42 GPM

• Primary Boom Construction 

5/16 x 5 x 5 high-strength steel tubing

• Dipper Boom 

5/16 x 4 x 5 high-strength steel tubing

• Safety Breakaway

Built into hydraulic system (standard)

• Quick Attach Boom Head

Quick Disconnects on Attachment Hydraulics
Optional 48″ Saw Blade Attachment
Optional hinged Door for 60″ Cutting Deck

The Difference

• Bush-Whacker’s Rear-Mount Boom Cutter is an engineering marvel! We offer a notable difference with our 3/4″ cutting blades

• versus traditional 1/2″ or 5/8″ and a completely self-contained hydraulic system. Bush-Whacker’s Rear-Mount Cutter also

• includes blades with a cutting edge on three sides versus traditional two-sides. And best of all, you’ll receive the

• benefits of a heavy-duty mid-mount cutter at the price (and convenience) of a 3-point hitch!

• We now offer two cutting head options:
  A) A hinged deck brush cutter B) A saw blade attachment