2026 BaumaLight MS960 

The MS960 Baumalight brush mulcher is a 60” heavy duty bush mulcher with a 75” Path width and it has turned into a very popular model for mulching with average to large skidsteers. The 900 Series teeth are available in either Double Carbide Tipped Ripper or Single Blade Planer style. The carbide Ripper tooth is the good general use tooth for mulching with lots of ground contact, if there are not many stones then the Planer tooth is a little bit more efficient. The 900 series skidsteer mulchers also come with a larger pressure gauge which is very handy to watch and see how close you are to maximum pressure; once you start blowing over relief the mulcher becomes very unproductive so you do want to keep an eye on the pressure. Operating a Brush Mulcher from a skid steer is probably the most comfortable way for vegetation management as your work is directly in front of you and new skidsteers are very operator comfort focused.
The MS960 is available with a variable two-speed motor option to maximize the rotor speed and torque to account for changing mulching material
The standard bent axis piston motors make the most use of your hydraulic flow and pressure for your brush clearing needs. The rear of the unit is guarded by a 3/8” thick chain curtain so standing brush enters and mulched debris exits. If a fence wire is caught during the mulching process , it can damage the unit by slipping over to the edge of the rotor and get wrapped on the shaft, so wire protection kit is provided to safeguard the rotor and the shaft. Our powder coat finish is much tougher than conventional paint to stand up to the rigors of mulching and helps prevent rusting. To improve the weight management of the brush mulchers, the rotor is provided closer to the carrier.
See our brush cutting size chart to see what limb size this heavy duty skidsteer mounted forestry mulcher can handle. To verify motor options for maximum brush cutting sizes, you can visit the chart below.