2026 Bale Baron NEW WR700: FOR FRONT AND REAR

Unlike other models in the WR windrower range, the WR 700 has 3x support wheels mounted inside the rotors. Thanks to the floating headstock, the rotors can independently follow the contours of the field. The wheels also have an easy-to-use stepless height adjustment.

The frame is constructed in three sections, with the middle having three support wheels.

When doubling the swaths behind a mower, the working width of the mower should be less than 4.5-m (14 ft.) and the swath width should be less than 1.2-m (4ft).

As with the WR600, when operating on a front loader, the WR 700 is kept as close to the tractor as possible. Additionally, as with its smaller sister, the WR 700 can also be equipped with a headstock for rear linkage operation, and both front and rear headstocks can be installed at the same time.

It should be noted that the WR 700 weighs 1100 kg (2425lbs) and may not be suitable for all tractors and all front loaders. Front or rear linkage mounting maybe be a safer alternative.

As standard, the WR 700 is delivered with electric independent rotor control. Lifting of the wing sections and adjusting the working width are on shared valves, ensuring work control is kept precise. Additionally, separate control allows for the rotors to be moved laterally during operation, keeping the windrows in the proper form. For example: In bends, around brush piles, poles, or other areas.

There are three rotor switch positions: left, right, or both at the same time.